![]() The TKF cables had a rather thick layer of Kevlar around the bundles, so cutting into the fibers was no easy task, but with the Corning cables that have no Kevlar around them we are worried to produce a lot of unwanted splices, by cutting it. Normaly we can jet 192f cables with not a single Bar of pressure for 400m with 90-110m/min, but today we were only able to do 100m with 0 Bar and 500m with 5 Bar, only at 70-55m/min.īut those results aren't the only thing that worries me. The 144f cables are way slimmer than the TKF ones, so we have great jetting results (3000m with one single Minijet), about 2x longer than with TKF, but the 192f one we tried today was another story. Now the customer bought Corning cables since the bid was the lowest and we have mixed feelings. Great results in terms of jetting into 14mm tubes. The previouse project we did for them used cables we recommended (TKF Twentsche KabelFabriek). Armordillo Splice-On Connectors - 3.Right now we started a project for a state owned customer that developes areas which wouldn't get any coverage by other ISPs.The single panel housing can be mounted in multiple orientations including a DIN rail mounting option to allow fiber protection and connectivity in electronic and/or control cabinet applications as well as standard wall mounting. The durable black metal housing can be used for splice management, cross-connect or both for up to 12 single fiber heat-shrink splices, and the improved splice organizer will also handle six ribbon heat shrink splices if so desired. The built-in splice tray with routing guides provide both protection and segregation of the cable and fiber during initial install and any future MAC work that is needed. The SPH-01P housings have a stacking feature to allow up to three independent SPH-01P housings to be stacked and function as one wall mount unit allowing capacity expansion without consuming additional wall space. This compact unit has a 1.5 inch frontal projection and is optimized for use in locations such as Box-in-a-Box applications, building entrances, terminals, wiring closets, open office and other areas where space is a premium. The housing accepts standard LANscape® solution CCH connector panels and offers protection for the fiber cable and connectors for indoor wall mount installations. Optical Splitter Rack Mount Connector AdaptersĬorning single panel housing is a cost-effective option for storage, protection and termination of optical fiber cables in applications with minimal mounting space.Optical Splitter LGX Package with Connector Adapters.All Dielectric Self Supporting (ADSS) Cable. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |